The new method / design we are using eliminates Exhaust Gas reversion while increasing volumetric efficiency and effective compression ratio. This time it is working really well, so far (1000 miles).

I have been reading posts on this site for a good time now and I'm astounded by what I've been able to learn here. It's now my turn to ask a question and I'd really appreciate any help that anyone ha

I am involved with the design of a pumphouse which consists of four (4) fixed speed centrifugal pumps (duty/assist/assist/assist), each pump being large, 4500m3/hr at 50m total head.

I have a question concerning pressure changes. We are trying to make small pressure changes to a static pressure of 5psi by varying the volume in a cylinder.

Question about settings for our thermal relief PRVs around valves in tank farms. Nornmally we have the PRvs set at 25 psi in the piping and 75 psi at the valve directly off the tank (our tanks are not

My company builds industrial sized centrifugal fans (40"-120"+ impeller diameters), and we treat "Fan Engineering" like it is the Bible.

No power since 8am now 3:30pm PoCo thinks they'll have it back on by tomorrow at 3pm. So it's on to the generator for keeping the business running. Never mind we're in the middle of a town of 50k an

Is there an industry standard or performance expectation for 2 wire 4-20mA output devices (actuators, positioners) for signal levels below 4mA? For example, many field transmitters incorporate special